DESCRIPTION
The procedure consists of heating two tubes (or a tube with a fitting of the same outer diameter and thickness as the tube) using a heating plate, then with pressure to achieve the union of the two elements.
It is often used for large diameters. It is very important that it is always done between equal thicknesses and diameters
With diameters from 200 mm
| REF. | DESC. |
|---|---|
| PPR.C90 | BUTT FUSION ELBOW 90º (200mm - 315mm) |
| PPR.C45 | BUTT FUSION ELBOW 45º (200mm - 315mm) |
| PPR.T | BUTT FUSION TEE SDR 11 (200mm - 315mm) |
| PPR.TAP | BUTT FUSION CAP SDR11 (200mm - 315mm) |
| PPR.VAL | BUTT FUSION STUB END SDR 11 (200mm - 315mm) |
| PPR.VAL | BUTT FUSION STUB END SDR 11 (200mm - 315mm) |
| PPR. MRD | BUTT FUSION REDUCER SDR 11 (200mm - 315mm) |